Laser marking machines are the same as other products，As the usage time accumulates，There will be some minor problems，Laser marking machine repair is more troublesome，It is likely to affect production efficiency，Even delays delivery time to customers，Causing losses to the factory。In fact, many common problems with automated laser marking machines，No professional repair required，Can handle it yourself，So for some common questions，How do we deal with it?
Fault One：Automatic laser marking machine，Laser intensity decreases，The marker is blurred。
For this kind of problem，We first need to check if there is a problem with Krypton lamp，If the current is adjusted，Still not meeting the standard light intensity，It means that a new light needs to be replaced。Then we want to see if it is due to laser deviation，Cause marking blur，Observe by looking at the laser light of the galvanometer off-center、Adjust the laser。
Fault Two：The krypton lamp of the automated laser marking machine cannot be triggered。
This failure usually results in two situations，One is wire contact problem，We want to check all power connections，Exclude whether it is caused by wire problems，Updated as appropriate、repair。The second case is krypton lamp，If the wires are fine，So most of the reasons are the inoperable caused by the aging of krypton lamps，We just need to change a new light。
Fault Three：Automatic laser marking machine does not emit light。
When encountering this problem，First check whether the optical path screws of the entire machine are loose，If so, just tighten。Then need to accumulate dust in the gun body，The dusty situation causes damage to the endoscopy of the gun，Clean and replace it in time。If nothing goes wrong in these places，Then it may be a failure，If you work for a long time，It will cause the laser power to drop，Need to open the bottom cover of the gun，Make adjustments in gun endoscopy。If the machine doesn't work for a long time，Then it is likely that the lamp tube is aging，Just replace the light tube。
Although the maintenance of automated laser marking machines is more troublesome，But its principle is relatively simple，Operators should pay attention to the maintenance and maintenance of the machine when using it，Keep the equipment working in optimal condition。At the same time, if there are some minor problems，Operators master troubleshooting skills，Can quickly re-work the equipment，Improve production efficiency。